Crystalline solar PV panels produce the most power when they are pointed directly at the sun. In Australia, solar modules should face north for maximum electricity generation. The orientation of the panels will often have a greater effect on annual energy generation than the angle they are tilted at.
The current feed-in tariff structures in Australia result in east-west-facing systems generating an optimal return on investment, especially if the property utilizing solar
feed-in tariffs has low electricity usage in the middle of the day.
The Clean Energy Council’s (CEC) solar guidelines for residential PV recommend a
minimum tilt of 10° to ensure self-cleaning by rainfall; and for grid-connected PV
systems, CEC recommends positioning panels at the angle of latitude to maximize the
amount of energy produced annually.
Most Australian homes have a roof pitch of 20 – 30°, according to the CEC’s guidelines;
If a roof slope is not ideal, a mounting frame can correct the orientation and elevation
of panels. For example , on flat-roof buildings (particularly commercial installations), panel arrays are usually installed on racks at an angle of 15–30°. Some companies typically only install at 15°, this allows for more modules to be placed on a roof, with less wind loads, lower cost, and the same yield. Yield is surprisingly insensitive to inclination.
The installation site, roof material, roof angle, the size and quantity of solar panels and
the number of module rows used will determine the dimensions, quantity and layout
of framing components required for installation.
Keep in mind that a lower tilt can allow you to fit more panels on the same roof, and
also that tilts generate shadows - make sure there’s sufficient space between the rows in a solar installation.
You may also like:
More about aluminum extrusion materials
How to check that a mounting system is safe to use
中文
